/* Début du commentaire multi-lignes CONFIGURATION FILE FOR BPQ32: G8BPQ SWITCH SOFTWARE --------------------------------------------------------------------------------------------------- les lignes précédée d'un point virgules sont ignorées Fichier Générique a modifier avec ses propres parametres Remplacer tous les NOCALL par votre indicatif (6 carractéres commencant par FR et terminant par 3 chiffres) il n'y a pas de regles précises sur les indicatifs CB Remplacer ALLIAS1 et ALLIAS2 ALLIAS3 ALLIAS4 par les allias de son choix Remplacer les coordonnées par les coordonnées de la stations Remplacer dans NODEALIAS, APPLnALLIAS's, IDMSG, BTEXT, INFOMSG and CTEXT en fonction de votre installation ---------------------------------------------------------------------------------------------------- */ Fin du commentaire multi-lignes LOCATOR=your locator MAPCOMMENT=NODES on 27.235MHz FM 1200Baud ;Voir LOCATOR details sur: ;http://www.cantab.net/users/john.wiseman/Documents/BPQNodeMap.htm ;PASSWORD=ABCDEFGHILKLMNOPQRSTUVWXY ; SYSOP Passord - Voir http://www.cantab.net/users/john.wiseman/Documents/Node%20SYSOP.html NODECALL=NOCALL-10 ; Indicatif du Node NODEALIAS=ALLIAS3 ; Node alias (6 characters max) BBSCALL=NOCALL-8 ; Replaced by APPL1CALL following APPLICATIONS= BBSALIAS=ALLIAS1 ; Replaced by APPL1ALIAS following APPLICATIONS= ;----------------------------------------------------------------------------------------------- IDMSG: ; UI broadcast text from NODECALL to fixed dest ID ;NOCALL-10 BPQ Node ;NOCALL-8 BPQ Mail ;NOCALL-4 BPQ Chat ;NOCALL-3 Paxon ;NOCALL-10 RMS ; UI broadcast text from NODECALL to fixed dest ID ####################################################################################### @@@ NODE APRS BPQ32 Nord/Est FRENCH < NOCALL.DDNS.NET UDP 93 >< NODE NOCALL-10 > @@@ ####################################################################################### *** ;----------------------------------------------------------------------------------------------- /* Le BTEXT ci-dessous contient une spécification d'emplacement APRS. Recherchez dans Internet pour "la Spécification de Protocole APRS" pour des détails sur le format. Si vous ne voulez pas ceci faire, il serait le meilleur de remplacer la ligne par simple non le texte APRS plutôt que transmet les données incorrectes qui peuvent constater que c'est le chemin via APRS IGates vers FINDU.COM. */ BTEXT: ; UI broadcast text from BCALL to destination UNPROTO= !4814.81N/00553.89E# - PACKET APRS 27.235Mhz FM 1200Baud LOCATOR *** ;----------------------------------------------------------------------------------------------- INFOMSG: ; Information sur les commandes texte: BPQ32 Node NOCALL-10 N/E FRANCE LOCATOR STATION AMATEUR RADIO 11Metres SYSOP:YourMail@XXXX.fr C - Connecter a un autre NODE "C port call" N - autres NODES disponnibles. P - Ports disponnibles U - Utilisateurs sur le NODE. L - Liens actifs . MH - port 1 control?. R - Routes ver d'autres systemes B - Quitter le NODE. S - Voir le status du Node. BBS - passer sur la BBS NOCALL-8. *** ;----------------------------------------------------------------------------------------------- CTEXT: NODE: NOCALL-10 Qth: NORD/EST FRANCE LOCATOR "NOCALL.DDNS.NET UDP 93" . NOCALL-10 -> ELP ONNECT YE NFO OUTES

ORTS SERS EARD *** ;----------------------------------------------------------------------------------------------- FULL_CTEXT=1 ; 0=envois CTEXT aux L2 connectees au NODEALIAS uniquement ; 1=envois CTEXT a tous les connectees ;----------------------------------------------------------------------------------------------- ; Network System Parameters: OBSINIT=6 ; L'ensemble d'obsolescence initial quand un noeud est inclus ; dans une émission de noeuds reçue. Cette valeur est alors ; decrementée de 1 a chaques NODESINTERVAL. OBSMIN=4 ; When the obsolescence of a node falls below this ; value that node's information is not included in ; a subsequent nodes broadcast. NODESINTERVAL=8 ; Interval de diffusion des Nodes en minutes IDINTERVAL=9 ; 'IDMSG' UI diffusion interval en minutes, 0=OFF BTINTERVAL=10 ; The BTEXT diffusion interval en minutes, 0=OFF L3TIMETOLIVE=25 ; Max L3 hops L4RETRIES=3 ; niveau 4 retry count L4TIMEOUT=60 ; niveau 4 timeout in seconds s/b > FRACK x RETRIES L4DELAY=10 ; niveau 4 delayed ack timer in seconds L4WINDOW=4 ; niveau 4 window size MAXLINKS=63 ; Max niveau 2 links MAXNODES=128 ; Max nodes in nodes table MAXROUTES=64 ; Max adjacent nodes MAXCIRCUITS=128 ; Max L4 circuits MINQUAL=10 ; Minimum quality to add to nodes table ; INP3 Routing is experimental. The two parms which follow will be ignored ; unless activated in the ROUTES: section. MAXHOPS=4 ; INP3 hop limit to add to tables MAXRTT=90 ; INP3 max RTT in seconds BUFFERS=255 ; Packet buffers - 255 means allocate as many as ; possible, normally about 130, depending upon other ; table sizes. ;----------------------------------------------------------------------------------------------- ; TNC default parameters: PACLEN=236 ; Max packet size (236 max for net/rom) /* PACLEN is a problem! The ideal size depends on the link(s) over which a packet will be sent. For a session involving another node, we have no idea what is at the far end. Ideally each node should have the capability to combine and then refragment messages to suit each link segment - maybe when there are more BPQ nodes about than 'other' ones, I'll do it. When the node is accessed directly, things are a bit easier, as we know at least something about the link. So, currently there are two PACLEN params, one here and one in the PORTS section. This one is used to set the initial value for sessions via other nodes and for sessions initiated from here. The other is used for incoming direct (niveau 2) sessions. In all cases the TNC PACLEN command can be used to override the defaults. */ ;----------------------------------------------------------------------------------------------- ; niveau 2 parametres: ; T1 (FRACK), T2 (RESPTIME) and N2 (RETRIES) are now in the PORTS section T3=120 ; Link validation timer in seconds IDLETIME=720 ; Idle link shutdown timer in seconds ; Configuration Options: AUTOSAVE=1 ; Saves BPQNODES.dat upon program exit BBS=1 ; 1 = BBS support included, 0 = No BBS support NODE=1 ; Include switch support HIDENODES=# ; If set to 1, nodes beginning with a # ; require a 'N *' command to be displayed. ; The *** LINKED command is intended for use by gateway software, and concern ; has been expressed that it could be misused. It is recommended that it be ; disabled (=N) if unneeded. ENABLE_LINKED=Y ; Controls processing of *** LINKED command ; Y = allows unrestricted use ; A = allows use by application program ; N = disabled ;----------------------------------------------------------------------------------------------- ; Definitions du port RADIO. PORT PORTNUM=1 ; Displayed by PORTS command ID=1200Baud 27.235 FM TYPE=EXTERNAL ;Calls an external module DLLNAME=BPQtoAGW.dll FULLDUP=0 ; Only meaningful for KISS or JKISS devices IOADDR=1F40 ; 1 = SERIAL PORT COM1 ETC. ; Only meaningful for KISS or JKISS devices SPEED=1200 ; RS232 COM PORT SPEED CHANNEL=A ; A for single channel TNC, A or B for multichannel PERSIST=74 ; PERSIST=256/(# of transmitters-1) SLOTTIME=200 ; CMSA interval timer in milliseconds TXDELAY=1000 ; Transmit keyup delay in milliseconds TXTAIL=1000 ; TX key down, in milliseconds, at packet end QUALITY=255 ; Quality factor applied to node broadcasts heard on MINQUAL=80 ; Entries in the nodes table with qualities greater or MAXFRAME=7 ; Max outstanding frames (1 thru 7) FRACK=8000 ; niveau 2 timout in milliseconds RESPTIME=1000 ; niveau 2 delayed ack timer in milliseconds RETRIES=10 ; niveau 2 maximum retry value PACLEN=236 ; Default max packet length for this port UNPROTO=APRS,WIDE7-7 ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]] BCALL=NOCALL-1 ; BTEXT1 call. unstated defaults to APPL1CALL L3ONLY=0 ; 1=No user downlink connects on this port DIGIFLAG=1 ; Digipeat: 0=OFF, 1=ALL, 255=UI Only DIGIPORT=0 ; Port on which to send digi'd frames (0 = same port) XDIGI=NOCALL-1,1 ; With DIGIPORT all frames are digi'ed to the same port. With XDIGI you can define USERS=0 ENDPORT ;----------------------------------------------------------------------------------------------- ; Radio port definitions. PORT PORTNUM=2 ; Displayed by PORTS commanD ID=UZ7HO Soundmodem DRIVER=UZ7HO CHANNEL=A PORTCALL=GM8BPQ PACLEN=80 CONFIG ADDR 127.0.0.1 8000 ;PATH C:\DevProgs\bpq32\SoundModem.exe MAXSESSIONS=5 UPDATEMAP BEACONAFTERSESSION ENDPORT ;----------------------------------------------------------------------------------------------- ; With the following definitions BPQ32 accesses the TNC directly. ; AX/IP/UDP port definition. PORT PORTNUM=3 ; Optional but sets port number if stated ID=AX/IP/UDP ; Displayed by PORTS command DRIVER=BPQAXIP ; Uses BPQAXIP capability of bpq32.dll QUALITY=192 ; Quality factor applied to node broadcasts heard on ; this port, unless overridden by a locked route ; entry. Setting to 0 stops node broadcasts MINQUAL=168 ; Entries in the nodes table with qualities greater or ; equal to MINQUAL will be sent on this port. A value ; of 0 sends everything. MAXFRAME=7 ; Max outstanding frames (1 thru 7) FRACK=3000 ; niveau 2 timout in milliseconds RESPTIME=100 ; niveau 2 delayed ack timer in milliseconds RETRIES=5 ; niveau 2 maximum retry value PACLEN=236 UNPROTO=APRS,WIDE7-7 ; BCALL=NOCALL-5 ; PORTCALL=NOCALL-5 ; Max = 236 CONFIG ; BPQAXIP.cfg has been deprecated. Instead the AXIP ; configuration occurs here: MHEARD ON ; Opens AXIP MHEARD window ;UDP 90 ; UDP 91 ; UDP 92 ; UDP 93 ; Ecoute les paquets UDP sur ce num?ro de port UDP UDP 94 ; UDP 95 ; UDP 96 ; UDP 97 ; UDP 98 ; ;UDP 99 ; UDP 193 ; UDP 10093 ; UDP 10094 ; You may listen on additional port numbers if desired: ; UDP 10094 ;Listens for UDP packets on this UDP port number ; Starting with bpqaxip.dll version 1.14.1.1 the default behavior is to not ; add information to BPQ32's nodes table for AX/IP/UDP nodes which are not ; explicitly listed in the bpqaxip.cfg file. The default behavior can be ; modified with these commands: ; DONTCHECKSOURCECALL ;This option allows entries in the NODES table from ;stations sending you nodes broadcasts without the ;corresponding node being configured in bpqaxip.cfg. AUTOADDMAP ;This option automatically adds the node call and ;address of a node for which you do not have a ;pre-arranged fixed entry in bpqaxip.cfg. If the ;option DONTCHECKSOURCECALL is specified then the ;AUTOADDMAP option is ignored. BROADCAST NODES BROADCAST QST BROADCAST APRS BROADCAST FBB BROADCAST BBS BROADCAST BPQ32 MAP FRA199-10 fra199.ddns.me UDP 93 B ;1 MAP CA9FRS-10 CA9FRS.NO-IP.ORG UDP 93 B ;2 MAP FRNOD FRA485.NO-IP.ORG UDP 93 B ;3 LINK VERS FRNOD LAISSER AINSI. MAP KS0NOD 194.59.177.64 UDP 93 B ;4LINK VERS KS0NOD. MAP NOD001 FRA001.ZAPTO.ORG UDP 93 B ;5 MAP CT1NET CT1NET.DDNS.NET UDP 193 B ;6 MAP DNO484 DBW400.DE UDP 10093 B ;7 MAP NODE59 fra376.hd.free.fr UDP 93 B ;8 MAP CB0DIB CB0VER.NO-IP.BIZ UDP 95 B ;11 MAP UM0NET UCKERMARK.NO-IP.ORG UDP 93 B ;13 MAP DOK346 DOK346.DYNDNS.ORG UDP 93 B ;15 MAP DNX530 85.25.146.8 UDP 93 B ;16 MAP DIG233 82.165.141.43 UDP 93 B ;18 MAP CB0HAL DNO320.NO-IP.ORG UDP 10093 B ;19 NODE DNO320 MAP DIG396 85.88.28.182 UDP 93 B ;20 MAP DNO266 DNO266.DDNS.NET UDP 98 B ;21 MAP CB0DDT 82.165.141.43 UDP 95 B ;22 MAP CB0DLN-8 CB0DLN.DDNS.NET UDP 93 B ;23 MAP DND946 62.75.175.165 UDP 93 B ;24 MAP DNX476 DNX476.NO-IP.ORG UDP 94 B ;25 MAP CB0VER CB0VER.NO-IP.BIZ UDP 93 B ;28 MAP BN1BAY 81.89.111.69 UDP 10093 B ;31 MAP AT2SN AT2SN.SYTES.NET UDP 94 B ;32 MAP DBX233 82.165.141.43 UDP 93 B ;33 MAP DNX587 DNX587.MX-HOST.DE UDP 93 B ;34 MAP FRB860-10 109.94.46.161 UDP 93 B ;35 MAP DNX274 DNX274.ORG UDP 93 B ;40 MAP DNO354 CB.NET-WORLD.EU UDP 93 B ;42 MAP NL9HGV 77.164.201.166 UDP 93 B ;45 MAP NL3ZZE NL3ZZE.DDNS.NET UDP 93 B ;48 MAP NL9ZZE INFO.XS4ALL.NL UDP 93 B ;57 MAP DNX206 hokocam.dyndns.org UDP 96 B ;58 MAP CB0GLA CB0GLA.DDNS.NET UDP 93 B ;59 MAP FRB224-10 BBSLINK.DDNS.NET UDP 95 B ;60 MAP FRA160-10 FRA160-8.DDNS.NET UDP 93 B ; MAP NL5RLD SERVER.PD2RLD.NL UDP 10094 B ; MAP FRB001-10 FRB001.DDNS.NET UDP 99 B ; MAP NOCALL-10 NOCALL.DDNS.NET UDP 93 B ; MAP NOCALL-4 192.168.1.5 UDP 10093 B ; ; If INP3 routing (experimental at this point) is utilized the 'B' command ; should not be included ; MAP BB9BB-6 example.com UDP 10093 ; Steve Conrad, VE9SC, fournit un service qui montre une carte de BPQMailChat ; Noeuds dynamiquement mis à jour: http://guardian.no-ip.org/bpqmap/ChatNetwork.htm ; inclure votre noeud de chat sur la carte enlèvent le ';'du MAP DUMMY ; La déclaration qui suit. Le reste de la déclaration doit rester exactement comme ; Montré. MAP DUMMY NOCALL.DDNS.NET UDP 10090 ; un keepalive peut être nécessaire si vous n'avez pas correctement configuré votre ; le routeur pour adresser(diriger) l'arrivée UDP le trafic à la machine spécifique sur vous ; le réseau local qui exécute(dirige) BPQ32. Vous devriez correctement configurer votre routeur ; pour que le keepalive soit inutile, comme ce stratagème n'est pas complètement ; fiable! ; dans le cas exceptionnel où votre fournisseur d'accès Internet laisse tomber votre trafic entrant ; le test a constaté que le keepalive pourrait aider ' gardent la porte ouvert '. ; dans l'exemple suivant un paquet keepalive est envoyé toutes les 30 secondes : ; MAP AA1AA-1 example.net KEEPALIVE 30 UDP 10093 B ; un mode de communication TCP expérimental a été ajouté avec le 2009/Aug/28 Bêta ; sortie. Le but est de contourner les questions(publications) de routeur qui sont presque certaines ; quand ' votre côté ', que nous appellerons le côté client, ne peut pas contrôler l'accès ; diriger l'arrivée UDP des paquets à votre machine. Au lieu de cela vous serez originaires ; d'une connexion via TCP. TCP est un protocole connecté, tous les routeurs devraient ; configurer automatiquement le chemin de retour à votre machine. ; un exemple serait votre noeud BPQ32, avec un appel de noeud de MYCALL-5, sur un ; ordinateur portable à un accès public site de WiFi. Unir(connecter) à AA1AA-1 via cette méthode ; vous aurez besoin de cette entrée dans votre liste de CARTE (sans le ; bien sûr) : ; MAP AA1AA-1 example.net TCP-Master 10093 B ; AA1AA-1 est l'appel de noeud du côté distant, par exemple: côté serveur. Le serveur ; doit avoir la capacité de programmer son routeur pour diriger l'arrivée TCP ; le trafic avec le port indiqué numérote à la machine exécutant BPQ32 le Noeud ; AA1AA-1, comme il fait pour UDP. ; BPQ32 Node AA1AA-1 at URL=example.net would add the folllowing entry to its ; MAP list: ; MAP MYCALL-5 0.0.0.0 TCP-Slave 10093 B ; As a result AA1AA-1 will listen for TCP packets on port 10093 from MYCALL-5. ; When heard, a TCP connection will result over which AX.25 traffic will flow. ; The server side obtains the client side ip address when the connection ; request is received. ; As currently implemented the client side will have to make advance ; arrangements with the server side so that the correct MAP entries will be in ; effect, as well as to specify a unique TCP port number for each prearranged ; client. ENDPORT ;----------------------------------------------------------------------------------------------- ;boucle locale PORT PORTNUM=4 ; Displayed by PORTS commanD ID= LOOPBACK TYPE=INTERNAL ;Calls an external module ;DLLNAME=BPQtoAGW.dll FULLDUP=0 ; Only meaningful for KISS or JKISS devices IOADDR=1F40 ; 1 = SERIAL PORT COM1 ETC. ; Only meaningful for KISS or JKISS devices SPEED=4800 ; RS232 COM PORT SPEED CHANNEL=A ; A for single channel TNC, A or B for multichannel PERSIST=74 ; PERSIST=256/(# of transmitters-1) SLOTTIME=200 ; CMSA interval timer in milliseconds TXDELAY=1000 ; Transmit keyup delay in milliseconds TXTAIL=1000 ; TX key down, in milliseconds, at packet end QUALITY=255 ; Quality factor applied to node broadcasts heard on MINQUAL=80 ; Entries in the nodes table with qualities greater or MAXFRAME=7 ; Max outstanding frames (1 thru 7) FRACK=8000 ; niveau 2 timout in milliseconds RESPTIME=1000 ; niveau 2 delayed ack timer in milliseconds RETRIES=10 ; niveau 2 maximum retry value PACLEN=236 ; Default max packet length for this port UNPROTO=APRS,WIDE7-7 ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]] BCALL=NOCALL-3 ; BTEXT1 call. unstated defaults to APPL1CALL L3ONLY=0 ; 1=No user downlink connects on this port DIGIFLAG=1 ; Digipeat: 0=OFF, 1=ALL, 255=UI Only DIGIPORT=0 ; Port on which to send digi'd frames (0 = same port) XDIGI=NOCALL-3,1 ; With DIGIPORT all frames are digi'ed to the same port. With XDIGI you can define USERS=0 ENDPORT ;----------------------------------------------------------------------------------------------- ;port telnet PORT PORTNUM=5 ; Optional but sets port number if stated ID=Telnet DRIVER=Telnet CONFIG CMS=1 LOGGING=1 DisconnectOnClose=1 TCPPORT=8010 FBBPORT=8011 6300 HTTPPORT=8080 CMDPORT=9002 ;CLUSTER CC-CLUSTER LOGINPROMPT=user: PASSWORDPROMPT=password: CMSCALL=NOCALL CMSPASS=sc47qb20 MAXSESSIONS=10 CTEXT=Welcome to NOCALL's Telnet Server\nEnter ? for list of commands\n\n USER=NOCALL,NOCALL,NOCALL,"",sysop ; User:NOCALL, PW:525FRC USER=FRC174,FRC174,FRC174,"", USER=FRA024,FRA024,FRA024,"", USER=FRB024,FRB024,FRB024,"", USER=FRB240,FRB240,FRB240,"", ENDPORT ;----------------------------------------------------------------------------------------------- APRSDIGI: RUN /home/pi/linbpq/piBPQAPRS ;RUN xastir APRSCall=NOCALL-10 StatusMsg=BPQ32 # NODE NOCALL-10 # NODE : NOCALL.DDNS.NET UDP 93, HF 27.235Mhz 1200Bd FM, BBS NOCALL-8; Symbol=n ;Icône à afficher pour la station. ;Symbol=# ;Icône à afficher pour la station. Symset=/ ; This is a "I" in a Black Diamond. ; ; Spécifiez un ajout de destination et un chemin d'accès pour chaque port que vous souhaitez utiliser pour APRS. Aucun moyen de destination ne reçoit qu'un seul port ; Les ports sans déclaration APRSPath ne seront pas utilisés par le Digi ; ; Notez si vous spécifiez APRS comme appel de destination, il sera remplacé par l'APRS BPQ32 actuel ; Destination d'identification - APBPQ1. Si vous souhaitez vraiment envoyer l'APRS, spécifiez APRS-0. ;APRSPath 1=APRS ;APRSPath 3=APRS,WIDE7-7 ;APRSPath 9=APRS,WIDE7-7 ;APRSPath 4=APRS,WIDE7-7 BeaconInterval=15 ; Send Beacon every 30 minute. Minimum is 5 mins MobileBeaconInterval=15 ; Beacon interval when moving ; Définir Crossport Digi. Pour chaque port, une liste de ports pour envoyer un paquet à (IS signifie envoyer à APRS-IS) ; Si un Digimap n'est pas spécifié pour un port, tapez sur le port sur lequel le paquet est arrivé, ; Et envoyer à APRS-IS (si activé) ; Si vous souhaitez digi sur le même port, mais pas envoyer à APRS-IS, Spécifiez Digimap n = n ; Si vous ne voulez pas digi sur un port, spécifiez Digimap n = ; ; Si vous avez seulement un port APRS, vous n'avez probablement pas besoin d'un relevé Digimap Digimap 1=3,IS Digimap 3=1,IS ; Digimap 9=9,7,IS ; Digimap 4=4,IS ; Définir les paramètres de Digipeater TraceCalls=WIDE7-7 ; Appels pour CALLN-n Processing with Trace FloodCalls=ALL,WIDE7-7 ; Calls for CALLN-n Processing without Trace DigiCalls=APRS,WIDE7-7 ; Calls for Normal (ie no SSID manipulation) Digi ; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out ; TraceCalls and FloodCalls. ReplaceDigiCalls ; Remplacez DigiCalls par APRSCall. Omettre si vous souhaitez que l'appel soit laissé tel qu'il est reçu. MaxTraceHops=2 ; Valeur maximale de n dans le traitement CALLN-n. Si un paquet est reçu avec n supérieur à MaxFloodHops=2 ; Ceci, la valeur sera remplacée AVANT de diminuer. GPSPort=0 ;Si spécifié, lat / lon sera prélevé sur un GPS, GPSSpeed=0 ;En annulant les valeurs définies ci-dessus. ; You can specify a fixed LAT/LONG instead of using GPS LAT=4814.81N ; Doit être en format APRS standard (ddmm.mmN / S) LON=00553.89E ; Doit être en format APRS standard (dddmm.mmE / W) ;IGATE Params. Si vous spécifiez, vous allez déposer des paquets RF et vos balises vers APRS-IS ; ISHost=cbaprs.de ISPort=27235 ISPasscode=17584 ; Vous pouvez spécifier une commande de filtrage à envoyer lorsque vous vous connectez à APRS-IS. Normalement, vous ne l'avez pas ; besoin d'un. L'application de mappage APRS (BPQAPRS) définit un filtre lorsqu'il démarre, ; Et si vous n'êtes pas en train d'exécuter une application APRS, il n'y a pas grand chose à obtenir des informations de APRS-IS ; ; ISFilter = m / 50; Filtrer la commande si nécessaire MaxAge=1440 ; The following objects, 444.80MUD and 146.85MUD, are being transmitted once ; every 30 minutes to APRS-IS and once every 10 minutes locally only via port ; 1 (radio). The termination of the path by 'NOGATE' for the radio port 1 ; means any IGate which hears this will not forward it to APRS-IS, and thus ; not clutter up APRS-IS needlessly! ;Le Digi peut générer des rapports objet et objet. ;Le format est assez strict - un espace unique entre les paires param = valeur et une virgule, mais pas d'espace dans la chaîne PATH et PORT. ;L'intervalle minimum est de 10 minutes. Vous pouvez avoir autant de lignes OBJECT que vous avez besoin. ; ;Voir la spécification thr APRS pour plus d'informations sur la façon de formater une chaîne Objet ou Objet. ;OBJECT PATH = APRS, WIDE1-1 PORT = 1, IS INTERVALLE = 30 TEXT =; 444.80BPQ * 111111z5807.60N / 00610.63Wr% 156 R15m ;OBJECT PATH=APRS,NOCALL-10,NOGATE PORT=1,IS INTERVAL=15 TEXT=;446.06875TONE67*.211336h4814.80N/00553.89Er Nord/EST France LOCATOR ;OBJECT PATH=APRS,fra199-3,NOGATE PORT=1 INTERVAL=10 TEXT=;444.80MUD*111111z4818.10N/09602.10WrT156 +500 R15m ;OBJECT PATH=APRS PORT=IS INTERVAL=30 TEXT=146.85MUD*111111z4817.95N/09601.49WrToff -060 R45m ;OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30 TEXT=;NOCALL-6*111111z4814.80N/00553.89E# Nord/EST France LOCATOR ;OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=30 TEXT=;NOCALL-8*111111z 4814.80N/00553.89E# Nord/EST France LOCATOR ;OBJECT PATH=APRS,A1ABC-5,A1GHI-3,A1JKL-7 PORT=2 INTERVAL=10 TEXT=;147.19WAN*111111zddmm.mmN/dddmm.mmWr147.190MHz T123 +060 ;OBJECT PATH=APRS PORT=IS INTERVAL=30 TEXT=;NOCALL*053851h4814.80N/00553.89E# Nord/EST France LOCATOR ;OBJECT PATH=APRS PORT=IS INTERVAL=30 TEXT=;NOCALL-10*080539z4814.80N/00553.89E# Nord/EST France LOCATOR ;OBJECT PATH=APRS PORT=1 INTERVAL=1 TEXT=NOCALL*053851h4814.80N/00553.89E# Nord/EST France li 1 LOCATOR ;OBJECT PATH=APRS PORT=1 INTERVAL=1 TEXT=NOCALL-10*080539z4814.80N/00553.89E# Nord/EST France li 2 LOCATOR ;OBJECT PATH=APRS PORT=1 INTERVAL=1 TEXT=NOCALL@053851h4814.80N/00553.89ErAPRS-IS for Win32 ;OBJECT PATH = APRS PORT = 1 INTERVAL = 1 TEXT =; NOCALL * 080539z4814.80N / 00553.88E ] Chat experimental NOCALL ;=4814.8 N\00553.8 E-PHG6140XASTIR-Linux ;@053851h4814.80N/00553.89ErAPRS-IS for Win32 ;*080539z4814.80N/00553.88E]Chat experimental NOCALL ;*080539z4814.80N/00553.88Entype h for help *** ;----------------------------------------------------------------------------------------------- ROUTES: ; Locked routes (31 maximum) /* ; Begin comment block CALLSIGN,QUALITY,PORT[,MAXFRAME,FRACK,PACLEN,INP3Enable] MAXFRAME, Frack and PACLEN if stated override the port defaults. INP3Enable = 1 enables, 0 or null disable. The INP3 (internode protocol) implementation in BPQ32 is experimental. See additional details in bpqaxip.cfg. Example of a route statement using INP3: HISCAL-12,1,1,0,0,0,1 MYCALL-13 achieves it's internet connectivity via MYCALL-14, thus the quality to MYCALL-13 is set high, at 255, to obtain high visibility on the net via MYCALL-14. Locked routes tend to be overused and should not be set unless truly needed. */ ; End comment block FRA199-10,255,3,5,0,0,1 ; BPQ AX/UPD Link1 CA9FRS-10,255,3,5,0,0,1 ; BPQ AX/UPD Link2 FRNOD,255,3,5,0,0,1 ; BPQ AX/UPD Link VERS FRNOD KS0NOD,255,3,5,,,1 ; BPQ AX/UPD Link VERS KS1NOD4 NOD001,255,3,5,,,1 ; BPQ AX/UPD Link5 CT1NET,236,3,4,,,1 ; BPQ AX/UPD Link6 DNO484,255,3,4,,,1 ; BPQ AX/UPD Link7 NODE59,255,3,4,,,1 ; BPQ AX/UPD Link8 ;NODE85,255,2,4,,,1 ; BPQ AX/UPD Link8 BIS CB0BID,255,3,4,,,1 ; BPQ AX/UPD Link9 DAV1D,255,3,3,,,1 ; BPQ AX/UPD Link10 DNO320,255,3,4,,,1 ; BPQ AX/UPD Link 11 liaison cb0hal ;FU6NET,255,2,4,,,1 ; BPQ AX/UPD Link12 DOK346,255,3,5,,,1 ; BPQ AX/UPD Link13; DNX530,255,3,4,,,1 ; BPQ AX/UPD Link14 UM0NET,255,3,4,,,1 ; BPQ AX/UPD Link15 CB0ESN,255,3,4,,,1 ; BPQ AX/UPD Link16 DIG233,255,3,4,,,1 ; BPQ AX/UPD Link17 CB0HAL,255,3,5,,,1 ; BPQ AX/UPD Link18 DIG396,255,3,5,,,1 ; BPQ AX/UPD Link19 I02SRV,255,3,4,,,1 ; BPQ AX/UPD Link20 DNO266,255,3,4,,,1 ; BPQ AX/UPD Link21 ;CB0DDT,255,3,4,,,1 ; BPQ AX/UPD Link22 ;JO61MB,255,2,4,,,1 ; BPQ AX/UPD Link23 DND946,255,3,4,,,1 ; BPQ AX/UPD Link24 DNX476,255,3,4,,,1 ; BPQ AX/UPD Link25 DHH500,255,3,4,,,1 ; BPQ AX/UPD Link26 CB0DLN-8,255,3,4,,,1 ; BPQ AX/UPD Link27 CB0VER-10,255,3,4,,,1 ; BPQ AX/UPD Link28 ;B0NET,255,3,4,,,1 ; BPQ AX/UPD Link29 ;BN1BAY,236,3,4,,,1 ; BPQ AX/UPD Link31 AT2SN,255,3,4,,,1 ; BPQ AX/UPD Link32 DBX233,255,3,4,,,1 ; BPQ AX/UPD Link33 DNX587,255,3,4,,,1 ; BPQ AX/UPD Link34 FRB860-10,255,3,4,,,1 ; BPQ AX/UPD Link35 ;WA1NET,255,2,4,,,1 ; BPQ AX/UPD Link37 NL3ZZE,255,3,4,,,1 ; BPQ AX/UPD Link38 ;CB0ESW,255,3,4,,,1 ; BPQ AX/UPD Link39 DNX274,255,3,4,,,1 ; BPQ AX/UPD Link40 ;DBN829,255,2,4,,,1 ; BPQ AX/UPD Link41 T01NRW,255,3,4,,,1 ; BPQ AX/UPD Link42 ;RSTNOD,255,3,4,,,1 ; BPQ AX/UPD Link43 VB2GAT-10,255,2,4,,,1 ; BPQ AX/UPD Link44 NL9HGV,255,3,4,,,1 ; BPQ AX/UPD Link45 FI3NOD,255,3,5,,,1 ; BPQ AX/UPD Link46 ;KR2GAT,255,2,4,,,1 ; BPQ AX/UPD Link48 VB2NOD,255,3,4,,,1 ; BPQ AX/UPD Link49 ;CB0SFT,255,2,4,,,1 ; BPQ AX/UPD Link50 ;;ROBBE1,255,2,4,,,1 ; BPQ AX/UPD Link51 ;;EFINET,255,2,5,,,1 ; BPQ AX/UPD Link52 ;T01NRW,255,2,4,,,1 ; BPQ AX/UPD Link54 ;BN1OBB,255,2,4,,,1 ; BPQ AX/UPD Link55 NL9ZZE,255,3,5,,,1 ; BPQ AX/UPD Link57 DNX206,255,3,4,,,1 ; BPQ AX/UPD Link58 ;CB0GLA,255,3,5,,,1 ; BPQ AX/UPD Link59 FRB199-10,255,3,5,,,1 ; BPQ AX/UPD Link60 ;MW1RBL,255,2,4,,,1 ; BPQ AX/UPD Link61 DBN829,255,3,4,,,1 ; BPQ AX/UPD Link62 ;NL9WAM,255,3,4,,,1 ; BPQ AX/UPD Link63 ;CT2NET,255,2,4,,,1 ; BPQ AX/UPD Link64 ;CT2BBS,255,3,4,,,1 ; BPQ AX/UPD Link65 A4NODE,255,3,4,,,1 ; BPQ AX/UPD Link66 NL9DHR,255,3,4,,,1 ; BPQ AX/UPD Link67 FRB224-10,236,3,4,,,1 ; BPQ AX/UDP LINK68 FRA160-10,236,3,4,,,1 ; BPQ AX/UDP LINK70 NL5RLD,255,3,5,,,1 ; BPQ AX/UDP LINK71 FRB001-10,236,3,5,,,1 ; BPQ AX/UDP LINK72 *** ;----------------------------------------------------------------------------------------------- /* Applications: You can define additional Node commands that are available to your users. These may connect to applications running on you computer, or be aliases or 'shortcuts' to other node commands. For example you can define the command "BBS". This can either be set up to connect to a BBS running on your computer, or to be an alias for a command that connects to a BBS on another system. You can set up a callsign that if connected to will select the command, and if required cause the call to be added to your NODES list. The format is: APPLICATION n,CMD,New Command,Call,Alias, Quality n Application Number. You can define up to 32. CMD The command the user types New Command (optional) The Node command to be run Call (optional) The call which directly invokes CMD Alias and Quality (optional) If specified, causes an entry for Call and Alias to be added to your NODES table with the specified Quality. Associated with each Application number is an application mask. Most BPQ32 applications can be configured to use any Application. An exception is AR-Cluster using the OCX interface, which must be Appl 1. Normally an Application Mask is configured in the application, rather than an Application Number. The following table gives the Application Mask values: Appl: 1,2,3,4,5,6,7,8, etc Decimal Mask: 1,2,4,8,16,32,64,128, etc Hexadecimal Mask: 0x1,0x2,0x4,0x8,0x10,0x20,0x40,0x80, etc */ LINMAIL LINCHAT APPLICATION 1,BBS,,NOCALL-8,ALLIAS1,250 APPLICATION 2,CHAT,,NOCALL-6,ALLIAS2,255 ;les applications non utilisées sont commentées. ;APPLICATION 1,DX,,MUDDX,255 ;APPLICATION 1,BBS,,NOCALL-1,WINTBB ;APPLICATION 2,CHAT,,NOCALL-2,QOCHAT ;APPLICATION 3,MYCHAT,CHAT MyTopic,NOCALL-14,MYCHAT ;APPLICATION 4,RMS,C 2 CMS,NOCALL-10,QORMS,255 ;APPLICATION 5,HFRMS,C 2 CMS,NOCALL ;APPLICATION 1,DX,,MUDDX,255 /* Dans cet exemple une application locale simple, l'AR-GROUPE, est supportée. Si un utilisateur connecté entre dans 'DX' le noeud sera appelera l'application associée au premier paramètre positionnel. Si nous choisissons utiliser l'interface OCX À L'AR-GROUPE, cela doit être le premier paramètre positionnel, comme l'AR-GROUPE ne donne pas à l'utilisateur l'option pour le mettre est le masque d'application, plutôt il est durement codé comme 0x1 intérieurement dans AR-GROUPE. Si au lieu de cela nous voulons utiliser l'interface AGWTOBPQ pour l'AR-GROUPE, les demandes(applications) peuvent être dans n'importe laquelle des 8 positions possibles. Cependant nous avons choisi la position 1, ainsi le masque dans AGWTOBPQ doit être configuré comme 0x1 pour correspondre au premier paramètre positionnel. */